Sun sail factor

The alternative to the umbrella: a sail that also serves as protection from a short rain shower. Really thought out to the end: the basic shape of the cloth is cut in a bow shape, so that the tension in the middle of the sail is ensured and it does not sag. With eyelets/rings at the corners and reinforced edges. Included in the delivery are galvanized eyebolts, dowels and tension straps as fastening material.

The triangular and square awnings are the ideal sun and rain protection over the patio, on the balcony or in the garden between trees. Quick to set up before the garden party falls through, or permanently installed for the whole summer, they are even water-repellent thanks to the high-quality Teflon coating. Heavy stainless steel rings on the suspension points and reinforced edges provide additional stability.Extra tension Permanently elastic tensioning straps keep the awning looking good and protect it from strong gusts of wind. All small items are included in the scope of delivery. The awnings are tensioned at the corners of the sail and are designed for light to medium wind loads. The concave cut is a prerequisite for successful installation of triangular or square awnings. The tensile force of the tensioning straps pulls the awning smooth from the center outwards. Tensioning the awning requires high-tensile stainless steel D-rings, which are attached to the belt-reinforced edge seam. Metal eyelets would tear out. This is the only way triangular or square sun awnings can withstand the required permanent tension. In addition, the tensioning straps of the sun awning ensure that the awning can withstand peak loads caused by gusts of wind during a thunderstorm. A concave sun awning with rain protection must be hung at an angle to prevent the formation of water pockets, which could damage the sun awning in the long term. An angle of approx. 15 degrees is recommended when installing the awning.